Repairing Operations

Functions
def	geompy.ChangeOrientation
	Reverses an orientation the given shape.
def	geompy.OrientationChange
	Shortcut to ChangeOrientation()
def	geompy.ProcessShape
	Apply a sequence of Shape Healing operators to the given object.
def	geompy.SuppressFaces
	Remove faces from the given object (shape).
def	geompy.MakeSewing
	Sewing of some shapes into single shape.
def	geompy.Sew
	Sewing of the given object.
def	geompy.SuppressInternalWires
	Remove internal wires and edges from the given object (face).
def	geompy.SuppressHoles
	Remove internal closed contours (holes) from the given object.
def	geompy.CloseContour
	Close an open wire.
def	geompy.DivideEdge
	Addition of a point to a given edge object.
def	geompy.ChangeOrientationShell
	Change orientation of the given object.
def	geompy.ChangeOrientationShellCopy
	Change orientation of the given object.
def	geompy.LimitTolerance
	Try to limit tolerance of the given object by value theTolerance.
def	geompy.GetFreeBoundary
	Get a list of wires (wrapped in GEOM_Object-s), that constitute a free boundary of the given shape.
def	geompy.MakeGlueFaces
	Replace coincident faces in theShape by one face.
def	geompy.GetGlueFaces
	Find coincident faces in theShape for possible gluing.
def	geompy.MakeGlueFacesByList
	Replace coincident faces in theShape by one face in compliance with given list of faces.
def	geompy.MakeGlueEdges
	Replace coincident edges in theShape by one edge.
def	geompy.GetGlueEdges
	Find coincident edges in theShape for possible gluing.
def	geompy.MakeGlueEdgesByList
	Replace coincident edges in theShape by one edge in compliance with given list of edges.

---

Function Documentation

def geompy.ChangeOrientation	(		self,
			theShape
	)

Reverses an orientation the given shape.

Parameters:

theShape

Shape to be reversed.

Returns:

The reversed copy of theShape.

Example

def geompy.OrientationChange	(		self,
			theShape
	)

Shortcut to ChangeOrientation()

Example

def geompy.ProcessShape	(		self,
			theShape,
			theOperators,
			theParameters,
			theValues
	)

Apply a sequence of Shape Healing operators to the given object.

Parameters:

theShape	Shape to be processed.
theOperators	List of names of operators ("FixShape", "SplitClosedFaces", etc.).
theParameters	List of names of parameters ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
theValues	List of values of parameters, in the same order as parameters are listed in theParameters list.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.SuppressFaces	(		self,
			theObject,
			theFaces
	)

Remove faces from the given object (shape).

Parameters:

theObject	Shape to be processed.
theFaces	Indices of faces to be removed, if EMPTY then the method removes ALL faces of the given object.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.MakeSewing	(		self,
			ListShape,
			theTolerance
	)

Sewing of some shapes into single shape.

Example

def geompy.Sew	(		self,
			theObject,
			theTolerance
	)

Sewing of the given object.

Parameters:

theObject	Shape to be processed.
theTolerance	Required tolerance value.

Returns:

New GEOM_Object, containing processed shape.

def geompy.SuppressInternalWires	(		self,
			theObject,
			theWires
	)

Remove internal wires and edges from the given object (face).

Parameters:

theObject	Shape to be processed.
theWires	Indices of wires to be removed, if EMPTY then the method removes ALL internal wires of the given object.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.SuppressHoles	(		self,
			theObject,
			theWires
	)

Remove internal closed contours (holes) from the given object.

Parameters:

theObject	Shape to be processed.
theWires	Indices of wires to be removed, if EMPTY then the method removes ALL internal holes of the given object

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.CloseContour	(		self,
			theObject,
			theWires,
			isCommonVertex
	)

Close an open wire.

Parameters:

theObject	Shape to be processed.
theWires	Indexes of edge(s) and wire(s) to be closed within theObject's shape, if [ ], then theObject itself is a wire.
isCommonVertex	If True : closure by creation of a common vertex, If False : closure by creation of an edge between ends.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.DivideEdge	(		self,
			theObject,
			theEdgeIndex,
			theValue,
			isByParameter
	)

Addition of a point to a given edge object.

Parameters:

theObject	Shape to be processed.
theEdgeIndex	Index of edge to be divided within theObject's shape, if -1, then theObject itself is the edge.
theValue	Value of parameter on edge or length parameter, depending on isByParameter.
isByParameter	If TRUE : theValue is treated as a curve parameter [0..1], if FALSE : theValue is treated as a length parameter [0..1]

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.ChangeOrientationShell	(		self,
			theObject
	)

Change orientation of the given object.

Updates given shape.

Parameters:

theObject

Shape to be processed.

Example

def geompy.ChangeOrientationShellCopy	(		self,
			theObject
	)

Change orientation of the given object.

Parameters:

theObject

Shape to be processed.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.LimitTolerance	(		self,
			theObject,
			theTolerance = 1e-07
	)

Try to limit tolerance of the given object by value theTolerance.

Parameters:

theObject	Shape to be processed.
theTolerance	Required tolerance value.

Returns:

New GEOM_Object, containing processed shape.

Example

def geompy.GetFreeBoundary	(		self,
			theObject
	)

Get a list of wires (wrapped in GEOM_Object-s), that constitute a free boundary of the given shape.

Parameters:

theObject

Shape to get free boundary of.

Returns:

[status, theClosedWires, theOpenWires] status: FALSE, if an error(s) occured during the method execution. theClosedWires: Closed wires on the free boundary of the given shape. theOpenWires: Open wires on the free boundary of the given shape.

Example

def geompy.MakeGlueFaces	(		self,
			theShape,
			theTolerance,
			doKeepNonSolids = True
	)

Replace coincident faces in theShape by one face.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between faces, which can be considered as coincident.
doKeepNonSolids	If FALSE, only solids will present in the result, otherwise all initial shapes.

Returns:

New GEOM_Object, containing a copy of theShape without coincident faces.

Example

def geompy.GetGlueFaces	(		self,
			theShape,
			theTolerance
	)

Find coincident faces in theShape for possible gluing.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between faces, which can be considered as coincident.

Returns:

ListOfGO.

Example

def geompy.MakeGlueFacesByList	(		self,
			theShape,
			theTolerance,
			theFaces,
			doKeepNonSolids = True,
			doGlueAllEdges = True
	)

Replace coincident faces in theShape by one face in compliance with given list of faces.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between faces, which can be considered as coincident.
theFaces	List of faces for gluing.
doKeepNonSolids	If FALSE, only solids will present in the result, otherwise all initial shapes.
doGlueAllEdges	If TRUE, all coincident edges of theShape will be glued, otherwise only the edges, belonging to theFaces.

Returns:

New GEOM_Object, containing a copy of theShape without some faces.

Example

def geompy.MakeGlueEdges	(		self,
			theShape,
			theTolerance
	)

Replace coincident edges in theShape by one edge.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between edges, which can be considered as coincident.

Returns:

New GEOM_Object, containing a copy of theShape without coincident edges.

Example

def geompy.GetGlueEdges	(		self,
			theShape,
			theTolerance
	)

Find coincident edges in theShape for possible gluing.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between edges, which can be considered as coincident.

Returns:

ListOfGO.

Example

def geompy.MakeGlueEdgesByList	(		self,
			theShape,
			theTolerance,
			theEdges
	)

Replace coincident edges in theShape by one edge in compliance with given list of edges.

Parameters:

theShape	Initial shape.
theTolerance	Maximum distance between edges, which can be considered as coincident.
theFaces	List of edges for gluing.

Returns:

New GEOM_Object, containing a copy of theShape without some edges.

Example