Data Structures
class	PointStructStr
class	PointStructStr6
class	AxisStructStr
class	DirStructStr
class	Mesh
	This class allows defining and managing a mesh. More...
class	Mesh_Algorithm
	The mother class to define algorithm, it is not recommended to use it directly. More...
class	Mesh_Segment
	Class to define a segment 1D algorithm for discretization. More...
class	Mesh_CompositeSegment
	Defines a segment 1D algorithm for discretization. More...
class	Mesh_Segment_Python
	Defines a segment 1D algorithm for discretization with python function. More...
class	Mesh_Triangle
	Defines a triangle 2D algorithm. More...
class	Mesh_Quadrangle
	Defines a quadrangle 2D algorithm. More...
class	Mesh_Tetrahedron
	Defines a tetrahedron 3D algorithm. More...
class	Mesh_Hexahedron
	Defines a hexahedron 3D algorithm. More...
class	Mesh_Netgen
	Defines a NETGEN-based 2D or 3D algorithm that needs no discrete boundary (i.e. More...
class	Mesh_Projection1D
	Defines a projection 1D algorithm. More...
class	Mesh_Projection2D
	Defines a projection 2D algorithm. More...
class	Mesh_Projection3D
	Defines a projection 3D algorithm. More...
class	Mesh_Prism3D
	Defines a 3D extrusion algorithm. More...
class	Mesh_RadialPrism3D
	Defines a Radial Prism 3D algorithm. More...
class	Mesh_RadialQuadrangle1D2D
	Defines a Radial Quadrangle 1D2D algorithm. More...
class	Mesh_UseExistingElements
	Defines a Radial Quadrangle 1D2D algorithm. More...
class	Mesh_UseExisting
class	LocalLength
class	LayerDistribution
class	SegmentLengthAroundVertex
class	Arithmetic1D
class	Deflection1D
class	StartEndLength
class	MaxElementArea
class	MaxElementVolume
class	NumberOfLayers
class	NumberOfSegments
class	NETGENPlugin_Hypothesis
class	NETGENPlugin_Hypothesis_2D
class	NETGEN_SimpleParameters_2D
class	NETGEN_SimpleParameters_3D
class	Pattern
Functions
def	DegreesToRadians
	Converts an angle from degrees to radians.
def	__init__
def	__init__
def	__init__
def	ParsePointStruct
def	ParseDirStruct
def	ParseAxisStruct
def	ParseAngles
	Return list of variable values from salome notebook.
def	IsEqual
def	GetName
	Gets object name.
def	TreatHypoStatus
	Prints error message if a hypothesis was not assigned.
def	CheckPlugin
	Check meshing plugin availability.
def	AssureGeomPublished
	Private method.
def	DumpPython
	Dump component to the Python script This method overrides IDL function to allow default values for the parameters.
def	init_smesh
	Sets the current study and Geometry component.
def	Mesh
	Creates an empty Mesh.
def	EnumToLong
	Returns a long value from enumeration Should be used for SMESH.FunctorType enumeration.
def	ColorToString
	Returns a string representation of the color.
def	GetPointStruct
	Gets PointStruct from vertex.
def	GetDirStruct
	Gets DirStruct from vector.
def	MakeDirStruct
	Makes DirStruct from a triplet.
def	GetAxisStruct
	Get AxisStruct from object.
def	SetName
	Sets the given name to the object.
def	SetEmbeddedMode
	Sets the current mode.
def	IsEmbeddedMode
	Gets the current mode.
def	SetCurrentStudy
	Sets the current study.
def	GetCurrentStudy
	Gets the current study.
def	CreateMeshesFromUNV
	Creates a Mesh object importing data from the given UNV file.
def	CreateMeshesFromMED
	Creates a Mesh object(s) importing data from the given MED file.
def	CreateMeshesFromSTL
	Creates a Mesh object importing data from the given STL file.
def	Concatenate
	Concatenate the given meshes into one mesh.
def	CopyMesh
	Create a mesh by copying a part of another mesh.
def	GetSubShapesId
	From SMESH_Gen interface.
def	GetPattern
	From SMESH_Gen interface.
def	SetBoundaryBoxSegmentation
	Sets number of segments per diagonal of boundary box of geometry by which default segment length of appropriate 1D hypotheses is defined.
def	GetEmptyCriterion
	Creates an empty criterion.
def	GetCriterion
	Creates a criterion by the given parameters Criterion structures allow to define complex filters by combining them with logical operations (AND / OR) (see example below)
def	GetFilter
	Creates a filter with the given parameters.
def	GetFunctor
	Creates a numerical functor by its type.
def	CreateHypothesis
	Creates hypothesis.
def	GetMeshInfo
	Gets the mesh stattistic.
def	MinDistance
	Get minimum distance between two objects.
def	GetMinDistance
	Get measure structure specifying minimum distance data between two objects.
def	BoundingBox
	Get bounding box of the specified object(s)
def	GetBoundingBox
	Get measure structure specifying bounding box data of the specified object(s)
def	ParseParameters
	Return values of the notebook variables.
Variables
int	noNETGENPlugin = 0
int	noGHS3DPlugin = 0
int	noGHS3DPRLPlugin = 0
int	noHexoticPlugin = 0
int	noBLSURFPlugin = 0
int	REGULAR = 1
int	PYTHON = 2
int	COMPOSITE = 3
int	SOLE = 0
int	SIMPLE = 1
int	MEFISTO = 3
int	NETGEN = 4
int	GHS3D = 5
int	FULL_NETGEN = 6
int	NETGEN_2D = 7
	NETGEN_1D2D = NETGEN
	NETGEN_1D2D3D = FULL_NETGEN
	NETGEN_FULL = FULL_NETGEN
int	Hexa = 8
int	Hexotic = 9
int	BLSURF = 10
int	GHS3DPRL = 11
int	QUADRANGLE = 0
int	RADIAL_QUAD = 1
	POINT = SMESH_MeshEditor.POINT
	AXIS = SMESH_MeshEditor.AXIS
	PLANE = SMESH_MeshEditor.PLANE
	LAPLACIAN_SMOOTH = SMESH_MeshEditor.LAPLACIAN_SMOOTH
	CENTROIDAL_SMOOTH = SMESH_MeshEditor.CENTROIDAL_SMOOTH
int	VeryCoarse = 0
int	Coarse = 1
int	Moderate = 2
int	Fine = 3
int	VeryFine = 4
int	Custom = 5
int	PrecisionConfusion = 1
string	var_separator = ":"
string	NO_NAME = "NoName"
tuple	studyID = mesh.smeshpyD.GetCurrentStudy()
	set the study
tuple	name = mesh.geompyD.SubShapeName(geom, mesh.geom)
	get a name
	notebook = salome_notebook.notebook
	xStr
	yStr
	zStr
	x
	y
	z
	x1Str
	x2Str
	y1Str
	y2Str
	z1Str
	z2Str
	x1
	x2
	y1
	y2
	z1
	z2
	dxStr
	dyStr
	dzStr
	dx
	dy
	dz
	pointStruct
	geompyD

Function Documentation

def smesh.DumpPython	(	self,
		theStudy,
		theIsPublished = `True`,
		theIsMultiFile = `True`
	)

Dump component to the Python script This method overrides IDL function to allow default values for the parameters.

def smesh.Concatenate	(	self,
		meshes,
		uniteIdenticalGroups,
		mergeNodesAndElements = `False`,
		mergeTolerance = `1e-5`,
		allGroups = `False`
	)

Concatenate the given meshes into one mesh.

Returns:: an instance of Mesh class

Parameters:

meshes	the meshes to combine into one mesh
uniteIdenticalGroups	if true, groups with same names are united, else they are renamed
mergeNodesAndElements	if true, equal nodes and elements aremerged
mergeTolerance	tolerance for merging nodes
allGroups	forces creation of groups of all elements

def smesh.CopyMesh	(	self,
		meshPart,
		meshName,
		toCopyGroups = `False`,
		toKeepIDs = `False`
	)

Create a mesh by copying a part of another mesh.

Parameters:

meshPart	a part of mesh to copy, either a Mesh, a sub-mesh or a group; to copy nodes or elements not contained in any mesh object, pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart
meshName	a name of the new mesh
toCopyGroups	to create in the new mesh groups the copied elements belongs to
toKeepIDs	to preserve IDs of the copied elements or not