#include <StdMeshers_Penta_3D.hxx>
Public Member Functions | |
| StdMeshers_Penta_3D () | |
| ~StdMeshers_Penta_3D () | |
| bool | Compute (SMESH_Mesh &, const TopoDS_Shape &) |
| int | ErrorStatus () const |
| SMESH_ComputeErrorPtr | GetComputeError () const |
| return compute error | |
| void | SetTolerance (const double theTol3D) |
| double | Tolerance () const |
| bool | LoadIJNodes (StdMeshers_IJNodeMap &theIJNodes, const TopoDS_Face &theFace, const TopoDS_Edge &theBaseEdge, SMESHDS_Mesh *theMesh) |
| bool | Evaluate (SMESH_Mesh &aMesh, const TopoDS_Shape &aShape, MapShapeNbElems &aResMap) |
Protected Member Functions | |
| void | CheckData () |
| void | MakeBlock () |
| void | MakeNodes () |
| double | SetHorizEdgeXYZ (const gp_XYZ &aBNXYZ, const int aFaceID, std::vector< const SMDS_MeshNode * > *&aCol1, std::vector< const SMDS_MeshNode * > *&aCol2) |
| void | ShapeSupportID (const bool theIsUpperLayer, const SMESH_Block::TShapeID theBNSSID, SMESH_Block::TShapeID &theSSID) |
| void | FindNodeOnShape (const TopoDS_Shape &aS, const gp_XYZ &aParams, const int z, StdMeshers_TNode &aTN) |
| void | CreateNode (const bool theIsUpperLayer, const gp_XYZ &aParams, StdMeshers_TNode &aTN) |
| void | ClearMeshOnFxy1 () |
| void | MakeMeshOnFxy1 () |
| void | MakeConnectingMap () |
| int | GetIndexOnLayer (const int aID) |
| void | MakeVolumeMesh () |
| void | SetMesh (SMESH_Mesh &theMesh) |
| SMESH_Mesh * | GetMesh () const |
Protected Attributes | |
| TopoDS_Shape | myShape |
| StdMeshers_SMESHBlock | myBlock |
| void * | myMesh |
| SMESH_ComputeErrorPtr | myErrorStatus |
| std::vector< StdMeshers_TNode > | myTNodes |
| int | myISize |
| int | myJSize |
| double | myTol3D |
| std::map< int, int > | myConnectingMap |
| std::vector< StdMeshers_IJNodeMap > | myWallNodesMaps |
| std::vector< gp_XYZ > | myShapeXYZ |
| bool | myCreateQuadratic |
| SMESH_MesherHelper * | myTool |
Definition at line 171 of file StdMeshers_Penta_3D.hxx.
| StdMeshers_Penta_3D::StdMeshers_Penta_3D | ( | ) |
Definition at line 72 of file StdMeshers_Penta_3D.cxx.
References myShapeXYZ, myTol3D, myTool, myWallNodesMaps, SMESH_Block.NbFaces(), and SMESH_Block.NbSubShapes().
: myErrorStatus(SMESH_ComputeError::New()) { myTol3D=0.1; myWallNodesMaps.resize( SMESH_Block::NbFaces() ); myShapeXYZ.resize( SMESH_Block::NbSubShapes() ); myTool = 0; }
| StdMeshers_Penta_3D::~StdMeshers_Penta_3D | ( | ) |
Definition at line 86 of file StdMeshers_Penta_3D.cxx.
{
}
| void StdMeshers_Penta_3D::CheckData | ( | ) | [protected] |
Definition at line 1307 of file StdMeshers_Penta_3D.cxx.
References MESSAGE, myErrorStatus, and myShape.
Referenced by Compute().
{
int i, iNb;
int iNbEx[]={8, 12, 6};
//
TopAbs_ShapeEnum aST;
TopAbs_ShapeEnum aSTEx[]={
TopAbs_VERTEX, TopAbs_EDGE, TopAbs_FACE
};
TopTools_IndexedMapOfShape aM;
//
if (myShape.IsNull()){
MESSAGE("StdMeshers_Penta_3D::CheckData() ");
myErrorStatus->myName=2; // null shape
myErrorStatus->myComment="Null shape";
return;
}
//
aST=myShape.ShapeType();
if (!(aST==TopAbs_SOLID || aST==TopAbs_SHELL)) {
MESSAGE("StdMeshers_Penta_3D::CheckData() ");
myErrorStatus->myName=3; // not compatible type of shape
myErrorStatus->myComment=SMESH_Comment("Wrong shape type (TopAbs_ShapeEnum) ")<<aST;
return;
}
//
for (i=0; i<3; ++i) {
aM.Clear();
TopExp::MapShapes(myShape, aSTEx[i], aM);
iNb=aM.Extent();
if (iNb!=iNbEx[i]){
MESSAGE("StdMeshers_Penta_3D::CheckData() ");
myErrorStatus->myName=4; // number of subshape is not compatible
myErrorStatus->myComment="Wrong number of subshapes of a block";
return;
}
}
}
| void StdMeshers_Penta_3D::ClearMeshOnFxy1 | ( | ) | [protected] |
Definition at line 861 of file StdMeshers_Penta_3D.cxx.
References SMESH_subMesh.CLEAN, GetMesh(), SMESH_Block.ID_Fxy1, myBlock, and StdMeshers_SMESHBlock.Shape().
Referenced by Compute().
{
SMESH_subMesh* aSubMesh;
SMESH_Mesh* pMesh=GetMesh();
//
const TopoDS_Shape& aFxy1=myBlock.Shape(SMESH_Block::ID_Fxy1);
aSubMesh = pMesh->GetSubMeshContaining(aFxy1);
if (aSubMesh)
aSubMesh->ComputeStateEngine( SMESH_subMesh::CLEAN );
}
| bool StdMeshers_Penta_3D::Compute | ( | SMESH_Mesh & | aMesh, |
| const TopoDS_Shape & | aShape | ||
| ) |
Definition at line 94 of file StdMeshers_Penta_3D.cxx.
References SMESH_fixation.aShape, CheckData(), ClearMeshOnFxy1(), SMESH_MesherHelper.IsQuadraticSubMesh(), MakeBlock(), MakeConnectingMap(), MakeMeshOnFxy1(), MakeNodes(), MakeVolumeMesh(), MESSAGE, myCreateQuadratic, myErrorStatus, myShape, myTool, and SetMesh().
Referenced by ComputePentahedralMesh().
{
MESSAGE("StdMeshers_Penta_3D::Compute()");
//
bool bOK=false;
//
myShape=aShape;
SetMesh(aMesh);
//
CheckData();
if (!myErrorStatus->IsOK()) {
return bOK;
}
//
MakeBlock();
if (!myErrorStatus->IsOK()) {
return bOK;
}
//
ClearMeshOnFxy1();
if (!myErrorStatus->IsOK()) {
return bOK;
}
// now unnecessary faces removed, we can load medium nodes
SMESH_MesherHelper helper(aMesh);
myTool = &helper;
myCreateQuadratic = myTool->IsQuadraticSubMesh(aShape);
//
MakeNodes();
if (!myErrorStatus->IsOK()) {
return bOK;
}
//
MakeConnectingMap();
//
MakeMeshOnFxy1();
if (!myErrorStatus->IsOK()) {
return bOK;
}
//
MakeVolumeMesh();
//
return !bOK;
}
| void StdMeshers_Penta_3D::CreateNode | ( | const bool | theIsUpperLayer, |
| const gp_XYZ & | aParams, | ||
| StdMeshers_TNode & | aTN | ||
| ) | [protected] |
Definition at line 4338 of file SMESH_MeshEditor.cxx.
References SMESHDS_Mesh.AddNode(), SMDS_Mesh.nodesIterator(), ex29_refine.P1, ex29_refine.P2, SMDS_MeshNode.X(), SMDS_MeshNode.Y(), and SMDS_MeshNode.Z().
Referenced by MakeNodes().
{
myLastCreatedElems.Clear();
myLastCreatedNodes.Clear();
gp_Pnt P1(x,y,z);
SMESHDS_Mesh * aMesh = myMesh->GetMeshDS();
// try to search in sequence of existing nodes
// if aNodes.Length()>0 we 'nave to use given sequence
// else - use all nodes of mesh
if(aNodes.Length()>0) {
int i;
for(i=1; i<=aNodes.Length(); i++) {
gp_Pnt P2(aNodes.Value(i)->X(),aNodes.Value(i)->Y(),aNodes.Value(i)->Z());
if(P1.Distance(P2)<tolnode)
return aNodes.Value(i);
}
}
else {
SMDS_NodeIteratorPtr itn = aMesh->nodesIterator();
while(itn->more()) {
const SMDS_MeshNode* aN = static_cast<const SMDS_MeshNode*> (itn->next());
gp_Pnt P2(aN->X(),aN->Y(),aN->Z());
if(P1.Distance(P2)<tolnode)
return aN;
}
}
// create new node and return it
const SMDS_MeshNode* NewNode = aMesh->AddNode(x,y,z);
myLastCreatedNodes.Append(NewNode);
return NewNode;
}
| int StdMeshers_Penta_3D.ErrorStatus | ( | ) | const |
Definition at line 180 of file StdMeshers_Penta_3D.hxx.
Referenced by ComputePentahedralMesh().
{
if (myErrorStatus->IsOK())
return 0;
return myErrorStatus->myName;
}
| bool StdMeshers_Penta_3D::Evaluate | ( | SMESH_Mesh & | aMesh, |
| const TopoDS_Shape & | aShape, | ||
| MapShapeNbElems & | aResMap | ||
| ) |
Definition at line 1859 of file StdMeshers_Penta_3D.cxx.
References COMPERR_ALGO_FAILED, SMESH_MesherHelper.IsQuadraticSubMesh(), Max(), MESSAGE, myErrorStatus, SMDSEntity_Edge, SMDSEntity_Last, SMDSEntity_Node, SMDSEntity_Penta, SMDSEntity_Quad_Edge, SMDSEntity_Quad_Penta, SMDSEntity_Quad_Quadrangle, SMDSEntity_Quad_Triangle, SMDSEntity_Quadrangle, and SMDSEntity_Triangle.
Referenced by EvaluatePentahedralMesh().
{
MESSAGE("StdMeshers_Penta_3D::Evaluate()");
// find face contains only triangles
vector < SMESH_subMesh * >meshFaces;
TopTools_SequenceOfShape aFaces;
int NumBase = 0, i = 0;
for (TopExp_Explorer exp(aShape, TopAbs_FACE); exp.More(); exp.Next()) {
i++;
aFaces.Append(exp.Current());
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
meshFaces.push_back(aSubMesh);
MapShapeNbElemsItr anIt = aResMap.find(meshFaces[i]);
if( anIt == aResMap.end() ) {
NumBase = 0;
break;
}
std::vector<int> aVec = (*anIt).second;
int nbtri = Max(aVec[SMDSEntity_Triangle],aVec[SMDSEntity_Quad_Triangle]);
int nbqua = Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
if( nbtri>0 && nbqua==0 ) {
NumBase = i;
}
}
if(NumBase==0) {
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
myErrorStatus->myName = COMPERR_ALGO_FAILED;
myErrorStatus->myComment = "Submesh can not be evaluated";
return false;
}
// find number of 1d elems for base face
int nb1d = 0;
TopTools_MapOfShape Edges1;
for (TopExp_Explorer exp(aFaces.Value(NumBase), TopAbs_EDGE); exp.More(); exp.Next()) {
Edges1.Add(exp.Current());
SMESH_subMesh *sm = aMesh.GetSubMesh(exp.Current());
if( sm ) {
MapShapeNbElemsItr anIt = aResMap.find(sm);
if( anIt == aResMap.end() ) continue;
std::vector<int> aVec = (*anIt).second;
nb1d += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
}
}
// find face opposite to base face
int OppNum = 0;
for(i=1; i<=6; i++) {
if(i==NumBase) continue;
bool IsOpposite = true;
for(TopExp_Explorer exp(aFaces.Value(i), TopAbs_EDGE); exp.More(); exp.Next()) {
if( Edges1.Contains(exp.Current()) ) {
IsOpposite = false;
break;
}
}
if(IsOpposite) {
OppNum = i;
break;
}
}
// find number of 2d elems on side faces
int nb2d = 0;
for(i=1; i<=6; i++) {
if( i==OppNum || i==NumBase ) continue;
MapShapeNbElemsItr anIt = aResMap.find( meshFaces[i-1] );
if( anIt == aResMap.end() ) continue;
std::vector<int> aVec = (*anIt).second;
nb2d += Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
}
MapShapeNbElemsItr anIt = aResMap.find( meshFaces[NumBase-1] );
std::vector<int> aVec = (*anIt).second;
int nb2d_face0 = Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
int nb0d_face0 = aVec[SMDSEntity_Node];
anIt = aResMap.find( meshFaces[OppNum-1] );
for(i=SMDSEntity_Node; i<SMDSEntity_Last; i++)
(*anIt).second[i] = aVec[i];
SMESH_MesherHelper aTool (aMesh);
bool _quadraticMesh = aTool.IsQuadraticSubMesh(aShape);
std::vector<int> aResVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aResVec[i] = 0;
if(_quadraticMesh) {
aResVec[SMDSEntity_Quad_Penta] = nb2d_face0 * ( nb2d/nb1d );
aResVec[SMDSEntity_Node] = nb0d_face0 * ( 2*nb2d/nb1d - 1 );
}
else {
aResVec[SMDSEntity_Node] = nb0d_face0 * ( nb2d/nb1d - 1 );
aResVec[SMDSEntity_Penta] = nb2d_face0 * ( nb2d/nb1d );
}
SMESH_subMesh * sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aResVec));
return true;
}
| void StdMeshers_Penta_3D::FindNodeOnShape | ( | const TopoDS_Shape & | aS, |
| const gp_XYZ & | aParams, | ||
| const int | z, | ||
| StdMeshers_TNode & | aTN | ||
| ) | [protected] |
Definition at line 489 of file StdMeshers_Penta_3D.cxx.
References StdMeshers_TNode.BaseNodeID(), GetMesh(), SMESH_Block.GetShapeIDByParams(), SMESH_Block.IsFaceID(), SMESH_MesherHelper.IsMedium(), myBlock, myTol3D, myTool, myWallNodesMaps, StdMeshers_SMESHBlock.Point(), StdMeshers_TNode.SetNode(), StdMeshers_SMESHBlock.ShapeID(), SMESH_Block.ShapeIndex(), SMDS_MeshNode.X(), SMDS_MeshNode.Y(), and SMDS_MeshNode.Z().
Referenced by MakeNodes().
{
double aX, aY, aZ, aD, aTol2, minD;
gp_Pnt aP1, aP2;
//
SMESH_Mesh* pMesh = GetMesh();
aTol2 = myTol3D*myTol3D;
minD = 1.e100;
SMDS_MeshNode* pNode = NULL;
//
if ( aS.ShapeType() == TopAbs_FACE ||
aS.ShapeType() == TopAbs_EDGE ) {
// find a face ID to which aTN belongs to
int faceID;
if ( aS.ShapeType() == TopAbs_FACE )
faceID = myBlock.ShapeID( aS );
else { // edge maybe vertical or top horizontal
gp_XYZ aCoord = aParams;
if ( aCoord.Z() == 1. )
aCoord.SetZ( 0.5 ); // move from top down
else
aCoord.SetX( 0.5 ); // move along X
faceID = SMESH_Block::GetShapeIDByParams( aCoord );
}
ASSERT( SMESH_Block::IsFaceID( faceID ));
int fIndex = SMESH_Block::ShapeIndex( faceID );
StdMeshers_IJNodeMap & ijNodes = myWallNodesMaps[ fIndex ];
// look for a base node in ijNodes
const SMDS_MeshNode* baseNode = pMesh->GetMeshDS()->FindNode( aTN.BaseNodeID() );
StdMeshers_IJNodeMap::const_iterator par_nVec = ijNodes.begin();
for ( ; par_nVec != ijNodes.end(); par_nVec++ )
if ( par_nVec->second[ 0 ] == baseNode ) {
pNode = (SMDS_MeshNode*)par_nVec->second.at( z );
aTN.SetNode(pNode);
return;
}
}
//
myBlock.Point(aParams, aS, aP1);
//
SMDS_NodeIteratorPtr ite=
pMesh->GetSubMeshContaining(aS)->GetSubMeshDS()->GetNodes();
while(ite->more()) {
const SMDS_MeshNode* aNode = ite->next();
if(myTool->IsMedium(aNode))
continue;
aX=aNode->X();
aY=aNode->Y();
aZ=aNode->Z();
aP2.SetCoord(aX, aY, aZ);
aD=(double)aP1.SquareDistance(aP2);
//printf("** D=%lf ", aD, aTol2);
if (aD < minD) {
pNode=(SMDS_MeshNode*)aNode;
aTN.SetNode(pNode);
minD = aD;
//printf(" Ok\n");
if (aD<aTol2)
return;
}
}
//
//printf(" KO\n");
//aTN.SetNode(pNode);
//MESSAGE("StdMeshers_Penta_3D::FindNodeOnShape(), can not find the node");
//myErrorStatus=11; // can not find the node;
}
| SMESH_ComputeErrorPtr SMESH_Algo::GetComputeError | ( | ) | const |
return compute error
Definition at line 186 of file StdMeshers_Penta_3D.hxx.
Referenced by ComputePentahedralMesh().
{
return myErrorStatus;
}
Definition at line 876 of file StdMeshers_Penta_3D.cxx.
References myConnectingMap, and myErrorStatus.
Referenced by MakeMeshOnFxy1(), and MakeVolumeMesh().
{
int j=-1;
StdMeshers_IteratorOfDataMapOfIntegerInteger aMapIt;
//
aMapIt=myConnectingMap.find(aID);
if (aMapIt==myConnectingMap.end()) {
myErrorStatus->myName = 200;
myErrorStatus->myComment = "Internal error of StdMeshers_Penta_3D";
return j;
}
j=(*aMapIt).second;
return j;
}
| SMESH_Mesh* StdMeshers_Penta_3D.GetMesh | ( | ) | const [protected] |
Definition at line 253 of file StdMeshers_Penta_3D.hxx.
Referenced by ClearMeshOnFxy1(), FindNodeOnShape(), MakeBlock(), MakeMeshOnFxy1(), MakeNodes(), and MakeVolumeMesh().
{
return (SMESH_Mesh*)myMesh;
}
| bool StdMeshers_Penta_3D::LoadIJNodes | ( | StdMeshers_IJNodeMap & | theIJNodes, |
| const TopoDS_Face & | theFace, | ||
| const TopoDS_Edge & | theBaseEdge, | ||
| SMESHDS_Mesh * | theMesh | ||
| ) |
Definition at line 1356 of file StdMeshers_Penta_3D.cxx.
References PAL_MESH_041_mesh.e1, PAL_MESH_041_mesh.e2, PAL_MESH_043_3D.face, SMESH_MeshEditor.FindFaceInSet(), SMESHDS_SubMesh.GetElements(), SMESHDS_SubMesh.GetNodes(), SMDS_MeshNode.GetPosition(), SMDS_MeshElement.GetType(), SMDS_EdgePosition.GetUParameter(), SMESH_MesherHelper.IsMedium(), SMESHDS_Mesh.MeshElements(), MESSAGE, myCreateQuadratic, myTool, SMESH_AdvancedEditor.n1, SMESH_AdvancedEditor.n2, SMESH_AdvancedEditor.n3, SMESH_AdvancedEditor.n4, NB_WALL_FACES, SMDS_MeshElement.NbNodes(), SMESHDS_SubMesh.NbNodes(), ex29_refine.node(), SMDS_MeshElement.nodesIterator(), and SMDSAbs_Face.
Referenced by MakeNodes().
{
// get vertices of theBaseEdge
TopoDS_Vertex vfb, vlb, vft; // first and last, bottom and top vertices
TopoDS_Edge eFrw = TopoDS::Edge( theBaseEdge.Oriented( TopAbs_FORWARD ));
TopExp::Vertices( eFrw, vfb, vlb );
// find the other edges of theFace and orientation of e1
TopoDS_Edge e1, e2, eTop;
bool rev1, CumOri = false;
TopExp_Explorer exp( theFace, TopAbs_EDGE );
int nbEdges = 0;
for ( ; exp.More(); exp.Next() ) {
if ( ++nbEdges > NB_WALL_FACES ) {
return false; // more than 4 edges in theFace
}
TopoDS_Edge e = TopoDS::Edge( exp.Current() );
if ( theBaseEdge.IsSame( e ))
continue;
TopoDS_Vertex vCommon;
if ( !TopExp::CommonVertex( theBaseEdge, e, vCommon ))
eTop = e;
else if ( vCommon.IsSame( vfb )) {
e1 = e;
vft = TopExp::LastVertex( e1, CumOri );
rev1 = vfb.IsSame( vft );
if ( rev1 )
vft = TopExp::FirstVertex( e1, CumOri );
}
else
e2 = e;
}
if ( nbEdges < NB_WALL_FACES ) {
return false; // less than 4 edges in theFace
}
// submeshes corresponding to shapes
SMESHDS_SubMesh* smFace = theMesh->MeshElements( theFace );
SMESHDS_SubMesh* smb = theMesh->MeshElements( theBaseEdge );
SMESHDS_SubMesh* smt = theMesh->MeshElements( eTop );
SMESHDS_SubMesh* sm1 = theMesh->MeshElements( e1 );
SMESHDS_SubMesh* sm2 = theMesh->MeshElements( e2 );
SMESHDS_SubMesh* smVfb = theMesh->MeshElements( vfb );
SMESHDS_SubMesh* smVlb = theMesh->MeshElements( vlb );
SMESHDS_SubMesh* smVft = theMesh->MeshElements( vft );
if (!smFace || !smb || !smt || !sm1 || !sm2 || !smVfb || !smVlb || !smVft ) {
MESSAGE( "NULL submesh " <<smFace<<" "<<smb<<" "<<smt<<" "<<
sm1<<" "<<sm2<<" "<<smVfb<<" "<<smVlb<<" "<<smVft);
return false;
}
if ( smb->NbNodes() != smt->NbNodes() || sm1->NbNodes() != sm2->NbNodes() ) {
MESSAGE(" Diff nb of nodes on opposite edges" );
return false;
}
if (smVfb->NbNodes() != 1 || smVlb->NbNodes() != 1 || smVft->NbNodes() != 1) {
MESSAGE("Empty submesh of vertex");
return false;
}
if ( sm1->NbNodes() * smb->NbNodes() != smFace->NbNodes() ) {
// check quadratic case
if ( myCreateQuadratic ) {
int n1 = sm1->NbNodes()/2;
int n2 = smb->NbNodes()/2;
int n3 = sm1->NbNodes() - n1;
int n4 = smb->NbNodes() - n2;
int nf = sm1->NbNodes()*smb->NbNodes() - n3*n4;
if( nf != smFace->NbNodes() ) {
MESSAGE( "Wrong nb face nodes: " <<
sm1->NbNodes()<<" "<<smb->NbNodes()<<" "<<smFace->NbNodes());
return false;
}
}
else {
MESSAGE( "Wrong nb face nodes: " <<
sm1->NbNodes()<<" "<<smb->NbNodes()<<" "<<smFace->NbNodes());
return false;
}
}
// IJ size
int vsize = sm1->NbNodes() + 2;
int hsize = smb->NbNodes() + 2;
if(myCreateQuadratic) {
vsize = vsize - sm1->NbNodes()/2 -1;
hsize = hsize - smb->NbNodes()/2 -1;
}
// load nodes from theBaseEdge
set<const SMDS_MeshNode*> loadedNodes;
const SMDS_MeshNode* nullNode = 0;
vector<const SMDS_MeshNode*> & nVecf = theIJNodes[ 0.];
nVecf.resize( vsize, nullNode );
loadedNodes.insert( nVecf[ 0 ] = smVfb->GetNodes()->next() );
vector<const SMDS_MeshNode*> & nVecl = theIJNodes[ 1.];
nVecl.resize( vsize, nullNode );
loadedNodes.insert( nVecl[ 0 ] = smVlb->GetNodes()->next() );
double f, l;
BRep_Tool::Range( eFrw, f, l );
double range = l - f;
SMDS_NodeIteratorPtr nIt = smb->GetNodes();
const SMDS_MeshNode* node;
while ( nIt->more() ) {
node = nIt->next();
if(myTool->IsMedium(node))
continue;
const SMDS_EdgePosition* pos =
dynamic_cast<const SMDS_EdgePosition*>( node->GetPosition() );
if ( !pos ) {
return false;
}
double u = ( pos->GetUParameter() - f ) / range;
vector<const SMDS_MeshNode*> & nVec = theIJNodes[ u ];
nVec.resize( vsize, nullNode );
loadedNodes.insert( nVec[ 0 ] = node );
}
if ( theIJNodes.size() != hsize ) {
MESSAGE( "Wrong node positions on theBaseEdge" );
return false;
}
// load nodes from e1
map< double, const SMDS_MeshNode*> sortedNodes; // sort by param on edge
nIt = sm1->GetNodes();
while ( nIt->more() ) {
node = nIt->next();
if(myTool->IsMedium(node))
continue;
const SMDS_EdgePosition* pos =
dynamic_cast<const SMDS_EdgePosition*>( node->GetPosition() );
if ( !pos ) {
return false;
}
sortedNodes.insert( make_pair( pos->GetUParameter(), node ));
}
loadedNodes.insert( nVecf[ vsize - 1 ] = smVft->GetNodes()->next() );
map< double, const SMDS_MeshNode*>::iterator u_n = sortedNodes.begin();
int row = rev1 ? vsize - 1 : 0;
for ( ; u_n != sortedNodes.end(); u_n++ ) {
if ( rev1 ) row--;
else row++;
loadedNodes.insert( nVecf[ row ] = u_n->second );
}
// try to load the rest nodes
// get all faces from theFace
TIDSortedElemSet allFaces, foundFaces;
SMDS_ElemIteratorPtr eIt = smFace->GetElements();
while ( eIt->more() ) {
const SMDS_MeshElement* e = eIt->next();
if ( e->GetType() == SMDSAbs_Face )
allFaces.insert( e );
}
// Starting from 2 neighbour nodes on theBaseEdge, look for a face
// the nodes belong to, and between the nodes of the found face,
// look for a not loaded node considering this node to be the next
// in a column of the starting second node. Repeat, starting
// from nodes next to the previous starting nodes in their columns,
// and so on while a face can be found. Then go the the next pair
// of nodes on theBaseEdge.
StdMeshers_IJNodeMap::iterator par_nVec_1 = theIJNodes.begin();
StdMeshers_IJNodeMap::iterator par_nVec_2 = par_nVec_1;
// loop on columns
int col = 0;
for ( par_nVec_2++; par_nVec_2 != theIJNodes.end(); par_nVec_1++, par_nVec_2++ ) {
col++;
row = 0;
const SMDS_MeshNode* n1 = par_nVec_1->second[ row ];
const SMDS_MeshNode* n2 = par_nVec_2->second[ row ];
const SMDS_MeshElement* face = 0;
do {
// look for a face by 2 nodes
face = SMESH_MeshEditor::FindFaceInSet( n1, n2, allFaces, foundFaces );
if ( face ) {
int nbFaceNodes = face->NbNodes();
if ( (!myCreateQuadratic && nbFaceNodes>4) ||
(myCreateQuadratic && nbFaceNodes>8) ) {
MESSAGE(" Too many nodes in a face: " << nbFaceNodes );
return false;
}
// look for a not loaded node of the <face>
bool found = false;
const SMDS_MeshNode* n3 = 0; // a node defferent from n1 and n2
eIt = face->nodesIterator() ;
while ( !found && eIt->more() ) {
node = static_cast<const SMDS_MeshNode*>( eIt->next() );
if(myTool->IsMedium(node))
continue;
found = loadedNodes.insert( node ).second;
if ( !found && node != n1 && node != n2 )
n3 = node;
}
if ( found ) {
if ( ++row > vsize - 1 ) {
MESSAGE( "Too many nodes in column "<< col <<": "<< row+1);
return false;
}
par_nVec_2->second[ row ] = node;
foundFaces.insert( face );
n2 = node;
if ( nbFaceNodes==4 || (myCreateQuadratic && nbFaceNodes==8) ) {
n1 = par_nVec_1->second[ row ];
}
}
else if ( (nbFaceNodes==3 || (myCreateQuadratic && nbFaceNodes==6) ) &&
n3 == par_nVec_1->second[ row ] ) {
n1 = n3;
}
else {
MESSAGE( "Not quad mesh, column "<< col );
return false;
}
}
}
while ( face && n1 && n2 );
if ( row < vsize - 1 ) {
MESSAGE( "Too few nodes in column "<< col <<": "<< row+1);
MESSAGE( "Base node 1: "<< par_nVec_1->second[0]);
MESSAGE( "Base node 2: "<< par_nVec_2->second[0]);
MESSAGE( "Current node 1: "<< n1);
MESSAGE( "Current node 2: "<< n2);
MESSAGE( "first base node: "<< theIJNodes.begin()->second[0]);
MESSAGE( "last base node: "<< theIJNodes.rbegin()->second[0]);
return false;
}
} // loop on columns
return true;
}
| void StdMeshers_Penta_3D::MakeBlock | ( | ) | [protected] |
Definition at line 1011 of file StdMeshers_Penta_3D.cxx.
References StdMeshers_SMESHBlock.ErrorStatus(), SMESHDS_SubMesh.GetElements(), StdMeshers_SMESHBlock.GetError(), GetMesh(), SMDS_MeshElement.GetType(), SMDS_MeshElement.IsQuadratic(), StdMeshers_SMESHBlock.Load(), MESSAGE, myBlock, myErrorStatus, myShape, NB_WALL_FACES, SMDS_MeshElement.NbNodes(), and SMDSAbs_Face.
Referenced by Compute().
{
bool bFound;
int i, j, iNbEV, iNbE, iErr, iCnt, iNbNodes, iNbF;
//
TopoDS_Vertex aV000, aV001;
TopoDS_Shape aFTr;
TopTools_IndexedDataMapOfShapeListOfShape aMVES;
TopTools_IndexedMapOfShape aME ,aMEV, aM;
TopTools_ListIteratorOfListOfShape aIt;
//
TopExp::MapShapes(myShape, TopAbs_FACE, aM);
//
// 0. Find triangulated face aFTr
SMDSAbs_ElementType aElementType;
SMESH_Mesh* pMesh=GetMesh();
//
iCnt = 0;
iNbF = aM.Extent();
for (i=1; i<=iNbF; ++i) {
const TopoDS_Shape& aF = aM(i);
SMESH_subMesh *aSubMesh = pMesh->GetSubMeshContaining(aF);
ASSERT(aSubMesh);
SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
SMDS_ElemIteratorPtr itf = aSM->GetElements();
while(itf->more()) {
const SMDS_MeshElement * pElement = itf->next();
aElementType = pElement->GetType();
if (aElementType==SMDSAbs_Face) {
iNbNodes = pElement->NbNodes();
if ( iNbNodes==3 || (pElement->IsQuadratic() && iNbNodes==6) ) {
aFTr = aF;
++iCnt;
if (iCnt>1) {
// \begin{E.A.}
// The current algorithm fails if there is more that one
// face wich contains triangles ...
// In that case, replace return by break to try another
// method (coded in "if (iCnt != 1) { ... }")
//
// MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
// myErrorStatus=5; // more than one face has triangulation
// return;
break;
// \end{E.A.}
}
break; // next face
}
}
}
}
//
// \begin{E.A.}
// The current algorithm fails if "iCnt != 1", the case "iCnt == 0"
// was not reached 'cause it was not called from Hexa_3D ... Now it
// can occurs and in my opinion, it is the most common case.
//
if (iCnt != 1) {
// The suggested algorithm is the following :
//
// o Check that nb_of_faces == 6 and nb_of_edges == 12
// then the shape is tologically equivalent to a box
// o In a box, there are three set of four // edges ...
// In the cascade notation, it seems to be the edges
// numbered :
// - 1, 3, 5, 7
// - 2, 4, 6, 8
// - 9, 10, 11, 12
// o For each one of this set, check if the four edges
// have the same number of element.
// o If so, check if the "corresponding" // faces contains
// only quads. It's the faces numbered:
// - 1, 2, 3, 4
// - 1, 2, 5, 6
// - 3, 4, 5, 6
// o If so, check if the opposite edges of each // faces
// have the same number of elements. It is the edges
// numbered :
// - 2 and 4, 6 and 8, 9 and 10, 11 and 12
// - 1 and 3, 5 and 7, 9 and 11, 10 and 12
// - 1 and 5, 3 and 7, 4 and 8, 2 and 6
// o If so, check if the two other faces have the same
// number of elements. It is the faces numbered:
// - 5, 6
// - 3, 4
// - 1, 2
// This test should be improved to test if the nodes
// of the two faces are really "en face".
// o If so, one of the two faces is a candidate to an extrusion,
// It is the faces numbered :
// - 5
// - 3
// - 1
// o Finally, if there is only one candidate, let do the
// extrusion job for the corresponding face
//
int isOK = 0;
//
int iNbF = aM.Extent();
if (iNbF == 6) {
//
int nb_f1 = pMesh->GetSubMeshContaining(aM(1))->GetSubMeshDS()->NbElements();
int nb_f2 = pMesh->GetSubMeshContaining(aM(2))->GetSubMeshDS()->NbElements();
int nb_f3 = pMesh->GetSubMeshContaining(aM(3))->GetSubMeshDS()->NbElements();
int nb_f4 = pMesh->GetSubMeshContaining(aM(4))->GetSubMeshDS()->NbElements();
int nb_f5 = pMesh->GetSubMeshContaining(aM(5))->GetSubMeshDS()->NbElements();
int nb_f6 = pMesh->GetSubMeshContaining(aM(6))->GetSubMeshDS()->NbElements();
//
int has_only_quad_f1 = 1;
int has_only_quad_f2 = 1;
int has_only_quad_f3 = 1;
int has_only_quad_f4 = 1;
int has_only_quad_f5 = 1;
int has_only_quad_f6 = 1;
//
for (i=1; i<=iNbF; ++i) {
int ok = 1;
const TopoDS_Shape& aF = aM(i);
SMESH_subMesh *aSubMesh = pMesh->GetSubMeshContaining(aF);
SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
SMDS_ElemIteratorPtr itf = aSM->GetElements();
while(itf->more()) {
const SMDS_MeshElement * pElement = itf->next();
aElementType = pElement->GetType();
if (aElementType==SMDSAbs_Face) {
iNbNodes = pElement->NbNodes();
if ( iNbNodes!=4 ) {
ok = 0;
break ;
}
}
}
if (i==1) has_only_quad_f1 = ok ;
if (i==2) has_only_quad_f2 = ok ;
if (i==3) has_only_quad_f3 = ok ;
if (i==4) has_only_quad_f4 = ok ;
if (i==5) has_only_quad_f5 = ok ;
if (i==6) has_only_quad_f6 = ok ;
}
//
TopTools_IndexedMapOfShape aE;
TopExp::MapShapes(myShape, TopAbs_EDGE, aE);
int iNbE = aE.Extent();
if (iNbE == 12) {
//
int nb_e01 = pMesh->GetSubMeshContaining(aE(1))->GetSubMeshDS()->NbElements();
int nb_e02 = pMesh->GetSubMeshContaining(aE(2))->GetSubMeshDS()->NbElements();
int nb_e03 = pMesh->GetSubMeshContaining(aE(3))->GetSubMeshDS()->NbElements();
int nb_e04 = pMesh->GetSubMeshContaining(aE(4))->GetSubMeshDS()->NbElements();
int nb_e05 = pMesh->GetSubMeshContaining(aE(5))->GetSubMeshDS()->NbElements();
int nb_e06 = pMesh->GetSubMeshContaining(aE(6))->GetSubMeshDS()->NbElements();
int nb_e07 = pMesh->GetSubMeshContaining(aE(7))->GetSubMeshDS()->NbElements();
int nb_e08 = pMesh->GetSubMeshContaining(aE(8))->GetSubMeshDS()->NbElements();
int nb_e09 = pMesh->GetSubMeshContaining(aE(9))->GetSubMeshDS()->NbElements();
int nb_e10 = pMesh->GetSubMeshContaining(aE(10))->GetSubMeshDS()->NbElements();
int nb_e11 = pMesh->GetSubMeshContaining(aE(11))->GetSubMeshDS()->NbElements();
int nb_e12 = pMesh->GetSubMeshContaining(aE(12))->GetSubMeshDS()->NbElements();
//
int nb_ok = 0 ;
//
if ( (nb_e01==nb_e03) && (nb_e03==nb_e05) && (nb_e05==nb_e07) ) {
if ( has_only_quad_f1 && has_only_quad_f2 && has_only_quad_f3 && has_only_quad_f4 ) {
if ( (nb_e09==nb_e10) && (nb_e08==nb_e06) && (nb_e11==nb_e12) && (nb_e04==nb_e02) ) {
if (nb_f5==nb_f6) {
nb_ok += 1;
aFTr = aM(5);
}
}
}
}
if ( (nb_e02==nb_e04) && (nb_e04==nb_e06) && (nb_e06==nb_e08) ) {
if ( has_only_quad_f1 && has_only_quad_f2 && has_only_quad_f5 && has_only_quad_f6 ) {
if ( (nb_e01==nb_e03) && (nb_e10==nb_e12) && (nb_e05==nb_e07) && (nb_e09==nb_e11) ) {
if (nb_f3==nb_f4) {
nb_ok += 1;
aFTr = aM(3);
}
}
}
}
if ( (nb_e09==nb_e10) && (nb_e10==nb_e11) && (nb_e11==nb_e12) ) {
if ( has_only_quad_f3 && has_only_quad_f4 && has_only_quad_f5 && has_only_quad_f6 ) {
if ( (nb_e01==nb_e05) && (nb_e02==nb_e06) && (nb_e03==nb_e07) && (nb_e04==nb_e08) ) {
if (nb_f1==nb_f2) {
nb_ok += 1;
aFTr = aM(1);
}
}
}
}
//
if ( nb_ok == 1 ) {
isOK = 1;
}
//
}
}
if (!isOK) {
myErrorStatus->myName=5; // more than one face has triangulation
myErrorStatus->myComment="Incorrect input mesh";
return;
}
}
// \end{E.A.}
//
// 1. Vetrices V00, V001;
//
TopExp::MapShapes(aFTr, TopAbs_EDGE, aME);
TopExp::MapShapesAndAncestors(myShape, TopAbs_VERTEX, TopAbs_EDGE, aMVES);
//
// 1.1 Base vertex V000
iNbE = aME.Extent();
if (iNbE!= NB_WALL_FACES ){
MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
myErrorStatus->myName=7; // too few edges are in base face aFTr
myErrorStatus->myComment=SMESH_Comment("Not a quadrilateral face #")
<<pMesh->GetMeshDS()->ShapeToIndex( aFTr )<<": "<<iNbE<<" edges" ;
return;
}
const TopoDS_Edge& aE1=TopoDS::Edge(aME(1));
aV000=TopExp::FirstVertex(aE1);
//
const TopTools_ListOfShape& aLE=aMVES.FindFromKey(aV000);
aIt.Initialize(aLE);
for (; aIt.More(); aIt.Next()) {
const TopoDS_Shape& aEx=aIt.Value();
aMEV.Add(aEx);
}
iNbEV=aMEV.Extent();
if (iNbEV!=3){
MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
myErrorStatus->myName=7; // too few edges meet in base vertex
myErrorStatus->myComment=SMESH_Comment("3 edges must share vertex #")
<<pMesh->GetMeshDS()->ShapeToIndex( aV000 )<<" but there are "<<iNbEV<<" edges";
return;
}
//
// 1.2 Vertex V001
bFound=false;
for (j=1; j<=iNbEV; ++j) {
const TopoDS_Shape& aEx=aMEV(j);
if (!aME.Contains(aEx)) {
TopoDS_Vertex aV[2];
//
const TopoDS_Edge& aE=TopoDS::Edge(aEx);
TopExp::Vertices(aE, aV[0], aV[1]);
for (i=0; i<2; ++i) {
if (!aV[i].IsSame(aV000)) {
aV001=aV[i];
bFound=!bFound;
break;
}
}
}
}
//
if (!bFound) {
MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
myErrorStatus->myName=8; // can not find reper V001
myErrorStatus->myComment=SMESH_Comment("Can't find opposite vertex for vertex #")
<<pMesh->GetMeshDS()->ShapeToIndex( aV000 );
return;
}
//DEB
//gp_Pnt aP000, aP001;
//
//aP000=BRep_Tool::Pnt(TopoDS::Vertex(aV000));
//printf("*** aP000 { %lf, %lf, %lf }\n", aP000.X(), aP000.Y(), aP000.Z());
//aP001=BRep_Tool::Pnt(TopoDS::Vertex(aV001));
//printf("*** aP001 { %lf, %lf, %lf }\n", aP001.X(), aP001.Y(), aP001.Z());
//DEB
//
aME.Clear();
TopExp::MapShapes(myShape, TopAbs_SHELL, aME);
iNbE=aME.Extent();
if (iNbE!=1) {
MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
myErrorStatus->myName=9; // number of shells in source shape !=1
myErrorStatus->myComment=SMESH_Comment("Unexpected nb of shells ")<<iNbE;
return;
}
//
// 2. Load Block
const TopoDS_Shell& aShell=TopoDS::Shell(aME(1));
myBlock.Load(aShell, aV000, aV001);
iErr = myBlock.ErrorStatus();
if (iErr) {
MESSAGE("StdMeshers_Penta_3D::MakeBlock() ");
myErrorStatus=myBlock.GetError(); // SMESHBlock: Load operation failed
return;
}
}
| void StdMeshers_Penta_3D::MakeConnectingMap | ( | ) | [protected] |
Definition at line 895 of file StdMeshers_Penta_3D.cxx.
References StdMeshers_TNode.BaseNodeID(), myConnectingMap, myJSize, and myTNodes.
Referenced by Compute().
{
int j, aBNID;
//
for (j=0; j<myJSize; ++j) {
const StdMeshers_TNode& aBN=myTNodes[j];
aBNID=aBN.BaseNodeID();
myConnectingMap[aBNID]=j;
}
}
| void StdMeshers_Penta_3D::MakeMeshOnFxy1 | ( | ) | [protected] |
Definition at line 768 of file StdMeshers_Penta_3D.cxx.
References SMESH_MesherHelper.AddFace(), SMESH_subMesh.CHECK_COMPUTE_STATE, PAL_MESH_043_3D.face, SMESHDS_SubMesh.GetElements(), SMDS_MeshElement.GetID(), GetIndexOnLayer(), GetMesh(), SMESHDS_SubMesh.GetNodes(), SMESH_MesherHelper.GetSubShape(), SMDS_MeshElement.GetType(), SMESH_Block.ID_Fxy0, SMESH_Block.ID_Fxy1, SMESH_MesherHelper.IsMedium(), SMESH_subMeshEventListenerData.MakeData(), MESSAGE, myBlock, myCreateQuadratic, myErrorStatus, myISize, myJSize, myShape, myTNodes, myTool, SMDS_MeshElement.NbNodes(), SMESHDS_SubMesh.NbNodes(), StdMeshers_TNode.Node(), SMDS_MeshElement.nodesIterator(), SMESHDS_Mesh.SetMeshElementOnShape(), SMESH_MesherHelper.SetSubShape(), StdMeshers_SMESHBlock.Shape(), and SMDSAbs_Face.
Referenced by Compute().
{
int aID0, aJ, aLevel, ij, aNbNodes, k;
//
SMDS_NodeIteratorPtr itn;
SMDS_ElemIteratorPtr itf, aItNodes;
SMDSAbs_ElementType aElementType;
//
const TopoDS_Face& aFxy0=
TopoDS::Face(myBlock.Shape(SMESH_Block::ID_Fxy0));
const TopoDS_Face& aFxy1=
TopoDS::Face(myBlock.Shape(SMESH_Block::ID_Fxy1));
//
SMESH_Mesh* pMesh = GetMesh();
SMESHDS_Mesh * meshDS = pMesh->GetMeshDS();
//
SMESH_subMesh *aSubMesh1 = pMesh->GetSubMeshContaining(aFxy1);
SMESH_subMesh *aSubMesh0 = pMesh->GetSubMeshContaining(aFxy0);
SMESHDS_SubMesh *aSM0 = aSubMesh0->GetSubMeshDS();
//
// set nodes on aFxy1
aLevel = myISize-1;
itn = aSM0->GetNodes();
aNbNodes = aSM0->NbNodes();
//printf("** aNbNodes=%d\n", aNbNodes);
myTool->SetSubShape( aFxy1 ); // to set medium nodes to aFxy1
//
// set elements on aFxy1
vector<const SMDS_MeshNode*> aNodes1;
//
itf = aSM0->GetElements();
while(itf->more()) {
const SMDS_MeshElement* pE0 = itf->next();
aElementType = pE0->GetType();
if (!aElementType==SMDSAbs_Face) {
continue;
}
aNbNodes = pE0->NbNodes();
if(myCreateQuadratic)
aNbNodes = aNbNodes/2;
if ( aNodes1.size() < aNbNodes )
aNodes1.resize( aNbNodes );
//
k = aNbNodes-1; // reverse a face
aItNodes = pE0->nodesIterator();
while (aItNodes->more()) {
const SMDS_MeshNode* pNode =
static_cast<const SMDS_MeshNode*> (aItNodes->next());
if(myTool->IsMedium(pNode))
continue;
aID0 = pNode->GetID();
aJ = GetIndexOnLayer(aID0);
if (!myErrorStatus->IsOK()) {
MESSAGE("StdMeshers_Penta_3D::MakeMeshOnFxy1() ");
return;
}
//
ij = aLevel*myJSize + aJ;
const StdMeshers_TNode& aTN1 = myTNodes[ij];
const SMDS_MeshNode* aN1 = aTN1.Node();
aNodes1[k] = aN1;
--k;
}
SMDS_MeshFace * face = 0;
switch ( aNbNodes ) {
case 3:
face = myTool->AddFace(aNodes1[0], aNodes1[1], aNodes1[2]);
break;
case 4:
face = myTool->AddFace(aNodes1[0], aNodes1[1], aNodes1[2], aNodes1[3]);
break;
default:
continue;
}
meshDS->SetMeshElementOnShape(face, aFxy1);
}
myTool->SetSubShape( myShape );
// update compute state of top face submesh
aSubMesh1->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
// assure that mesh on the top face will be cleaned when it is cleaned
// on the bottom face
SMESH_subMesh* volSM = pMesh->GetSubMesh( myTool->GetSubShape() );
volSM->SetEventListener( new SMESH_subMeshEventListener(true),
SMESH_subMeshEventListenerData::MakeData( aSubMesh1 ),
aSubMesh0 ); // translate CLEAN event of aSubMesh0 to aSubMesh1
}
| void StdMeshers_Penta_3D::MakeNodes | ( | ) | [protected] |
Definition at line 147 of file StdMeshers_Penta_3D.cxx.
References StdMeshers_TNode.BaseNodeID(), COMPERR_BAD_INPUT_MESH, StdMeshers_SMESHBlock.ComputeParameters(), CreateNode(), StdMeshers_SMESHBlock.ErrorStatus(), FindNodeOnShape(), StdMeshers_SMESHBlock.GetError(), SMDS_MeshElement.GetID(), GetMesh(), SMESHDS_SubMesh.GetNodes(), SMESH_MesherHelper.GetNodeUV(), SMDS_MeshNode.GetPosition(), SMDS_EdgePosition.GetUParameter(), SMESH_Block.ID_E00z, SMESH_Block.ID_E0y0, SMESH_Block.ID_E1y0, SMESH_Block.ID_Ex00, SMESH_Block.ID_Ex10, SMESH_Block.ID_F0yz, SMESH_Block.ID_F1yz, SMESH_Block.ID_Fx0z, SMESH_Block.ID_Fx1z, SMESH_Block.ID_Fxy0, SMESH_Block.ID_Fxy1, SMESH_Block.ID_NONE, SMESH_Block.ID_Shell, SMESH_Block.ID_V000, SMESH_Block.ID_V001, SMESH_Block.ID_V010, SMESH_Block.ID_V011, SMESH_Block.ID_V100, SMESH_Block.ID_V101, SMESH_Block.ID_V110, SMESH_Block.ID_V111, SMESH_Block.IsEdgeID(), SMESH_MesherHelper.IsMedium(), SMESH_Block.IsVertexID(), LoadIJNodes(), SMESHDS_Mesh.MeshElements(), MESSAGE, myBlock, myCreateQuadratic, myErrorStatus, myISize, myJSize, myShapeXYZ, myTNodes, myTool, myWallNodesMaps, NB_WALL_FACES, SMESHDS_SubMesh.NbNodes(), StdMeshers_TNode.Node(), StdMeshers_TNode.NormCoord(), StdMeshers_TNode.SetBaseNodeID(), SetHorizEdgeXYZ(), StdMeshers_TNode.SetNode(), StdMeshers_TNode.SetNormCoord(), StdMeshers_TNode.SetShapeSupportID(), StdMeshers_SMESHBlock.Shape(), SMESH_Block.ShapeIndex(), StdMeshers_TNode.ShapeSupportID(), ShapeSupportID(), SMDS_MeshNode.X(), SMESH_AdvancedEditor.xyz, SMDS_MeshNode.Y(), and SMDS_MeshNode.Z().
Referenced by Compute().
{
const int aNbSIDs=9;
int i, j, k, ij, iNbN, aNodeID, aSize, iErr;
double aX, aY, aZ;
SMESH_Block::TShapeID aSID, aSIDs[aNbSIDs]={
SMESH_Block::ID_V000, SMESH_Block::ID_V100,
SMESH_Block::ID_V110, SMESH_Block::ID_V010,
SMESH_Block::ID_Ex00, SMESH_Block::ID_E1y0,
SMESH_Block::ID_Ex10, SMESH_Block::ID_E0y0,
SMESH_Block::ID_Fxy0
};
//
SMESH_Mesh* pMesh=GetMesh();
//
// 1. Define the sizes of mesh
//
// 1.1 Horizontal size
myJSize=0;
for (i=0; i<aNbSIDs; ++i) {
const TopoDS_Shape& aS = myBlock.Shape(aSIDs[i]);
SMESH_subMesh *aSubMesh = pMesh->GetSubMeshContaining(aS);
ASSERT(aSubMesh);
SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
if(!myCreateQuadratic) {
iNbN = aSM->NbNodes();
}
else {
iNbN = 0;
SMDS_NodeIteratorPtr itn = aSM->GetNodes();
while(itn->more()) {
const SMDS_MeshNode* aNode = itn->next();
if(myTool->IsMedium(aNode))
continue;
iNbN++;
}
}
myJSize += iNbN;
}
//printf("*** Horizontal: number of nodes summary=%d\n", myJSize);
//
// 1.2 Vertical size
myISize=2;
{
const TopoDS_Shape& aS=myBlock.Shape(SMESH_Block::ID_E00z);
SMESH_subMesh *aSubMesh = pMesh->GetSubMeshContaining(aS);
ASSERT(aSubMesh);
SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
if(!myCreateQuadratic) {
iNbN = aSM->NbNodes();
}
else {
iNbN = 0;
SMDS_NodeIteratorPtr itn = aSM->GetNodes();
while(itn->more()) {
const SMDS_MeshNode* aNode = itn->next();
if(myTool->IsMedium(aNode))
continue;
iNbN++;
}
}
myISize += iNbN;
}
//printf("*** Vertical: number of nodes on edges and vertices=%d\n", myISize);
//
aSize=myISize*myJSize;
myTNodes.resize(aSize);
//
StdMeshers_TNode aTNode;
gp_XYZ aCoords;
gp_Pnt aP3D;
//
// 2. Fill the repers on base face (Z=0)
i=0; j=0;
// vertices
for (k=0; k<aNbSIDs; ++k) {
aSID=aSIDs[k];
const TopoDS_Shape& aS = myBlock.Shape(aSID);
SMDS_NodeIteratorPtr ite = pMesh->GetSubMeshContaining(aS)->GetSubMeshDS()->GetNodes();
while(ite->more()) {
const SMDS_MeshNode* aNode = ite->next();
if(myTool->IsMedium(aNode))
continue;
aNodeID=aNode->GetID();
//
aTNode.SetNode(aNode);
aTNode.SetShapeSupportID(aSID);
aTNode.SetBaseNodeID(aNodeID);
//
if ( SMESH_Block::IsEdgeID (aSID)) {
const SMDS_EdgePosition* epos =
static_cast<const SMDS_EdgePosition*>(aNode->GetPosition());
myBlock.ComputeParameters( epos->GetUParameter(), aS, aCoords );
}
else {
aX=aNode->X();
aY=aNode->Y();
aZ=aNode->Z();
aP3D.SetCoord(aX, aY, aZ);
myBlock.ComputeParameters(aP3D, aS, aCoords);
}
iErr = myBlock.ErrorStatus();
if (iErr) {
MESSAGE("StdMeshers_Penta_3D::MakeNodes()," <<
"SMESHBlock: ComputeParameters operation failed");
myErrorStatus=myBlock.GetError();
return;
}
aTNode.SetNormCoord(aCoords);
ij=i*myJSize+j;
myTNodes[ij]=aTNode;
++j;
}
}
// 3.1 Fill maps of wall nodes
SMESH_Block::TShapeID wallFaceID[ NB_WALL_FACES ] = {
SMESH_Block::ID_Fx0z, SMESH_Block::ID_Fx1z,
SMESH_Block::ID_F0yz, SMESH_Block::ID_F1yz
};
SMESH_Block::TShapeID baseEdgeID[ NB_WALL_FACES ] = {
SMESH_Block::ID_Ex00, SMESH_Block::ID_Ex10,
SMESH_Block::ID_E0y0, SMESH_Block::ID_E1y0
};
for ( i = 0; i < NB_WALL_FACES ; ++i ) {
int fIndex = SMESH_Block::ShapeIndex( wallFaceID[ i ]);
bool ok = LoadIJNodes (myWallNodesMaps[ fIndex ],
TopoDS::Face( myBlock.Shape( wallFaceID[ i ] )),
TopoDS::Edge( myBlock.Shape( baseEdgeID[ i ] )),
pMesh->GetMeshDS());
if ( !ok ) {
myErrorStatus->myName = COMPERR_BAD_INPUT_MESH;
myErrorStatus->myComment = SMESH_Comment() <<
"Can't find regular quadrangle mesh on a side face #" <<
pMesh->GetMeshDS()->ShapeToIndex( myBlock.Shape( wallFaceID[ i ]));
return;
}
}
// 3.2 find node columns for vertical edges and edge IDs
vector<const SMDS_MeshNode*> * verticEdgeNodes[ NB_WALL_FACES ];
SMESH_Block::TShapeID verticEdgeID [ NB_WALL_FACES ];
for ( i = 0; i < NB_WALL_FACES ; ++i ) { // 4 first base nodes are nodes on vertices
// edge ID
SMESH_Block::TShapeID eID, vID = aSIDs[ i ];
ShapeSupportID(false, vID, eID);
verticEdgeID[ i ] = eID;
// column nodes
StdMeshers_TNode& aTNode = myTNodes[ i ];
verticEdgeNodes[ i ] = 0;
for ( j = 0; j < NB_WALL_FACES ; ++j ) { // loop on 4 wall faces
int fIndex = SMESH_Block::ShapeIndex( wallFaceID[ j ]);
StdMeshers_IJNodeMap & ijNodes= myWallNodesMaps[ fIndex ];
if ( ijNodes.begin()->second[0] == aTNode.Node() )
verticEdgeNodes[ i ] = & ijNodes.begin()->second;
else if ( ijNodes.rbegin()->second[0] == aTNode.Node() )
verticEdgeNodes[ i ] = & ijNodes.rbegin()->second;
if ( verticEdgeNodes[ i ] )
break;
}
}
// 3.3 set XYZ of vertices, and initialize of the rest
SMESHDS_Mesh* aMesh = GetMesh()->GetMeshDS();
for ( int id = SMESH_Block::ID_V000; id < SMESH_Block::ID_Shell; ++id ) {
if ( SMESH_Block::IsVertexID( id )) {
TopoDS_Shape V = myBlock.Shape( id );
SMESHDS_SubMesh* sm = aMesh->MeshElements( V );
const SMDS_MeshNode* n = sm->GetNodes()->next();
myShapeXYZ[ id ].SetCoord( n->X(), n->Y(), n->Z() );
}
else
myShapeXYZ[ id ].SetCoord( 0., 0., 0. );
}
// 4. Fill the rest repers
bool bIsUpperLayer;
int iBNID;
SMESH_Block::TShapeID aSSID, aBNSSID;
StdMeshers_TNode aTN;
//
// create top face and find UV for it's corners
const TopoDS_Face& TopFace = TopoDS::Face(myBlock.Shape(SMESH_Block::ID_Fxy1));
SMESHDS_Mesh* meshDS = pMesh->GetMeshDS();
int topfaceID = meshDS->ShapeToIndex(TopFace);
const TopoDS_Vertex& v001 = TopoDS::Vertex(myBlock.Shape(SMESH_Block::ID_V001));
SMDS_NodeIteratorPtr itn = pMesh->GetSubMeshContaining(v001)->GetSubMeshDS()->GetNodes();
const SMDS_MeshNode* N = itn->next();
gp_XY UV001 = myTool->GetNodeUV(TopFace,N);
const TopoDS_Vertex& v101 = TopoDS::Vertex(myBlock.Shape(SMESH_Block::ID_V101));
itn = pMesh->GetSubMeshContaining(v101)->GetSubMeshDS()->GetNodes();
N = itn->next();
gp_XY UV101 = myTool->GetNodeUV(TopFace,N);
const TopoDS_Vertex& v011 = TopoDS::Vertex(myBlock.Shape(SMESH_Block::ID_V011));
itn = pMesh->GetSubMeshContaining(v011)->GetSubMeshDS()->GetNodes();
N = itn->next();
gp_XY UV011 = myTool->GetNodeUV(TopFace,N);
const TopoDS_Vertex& v111 = TopoDS::Vertex(myBlock.Shape(SMESH_Block::ID_V111));
itn = pMesh->GetSubMeshContaining(v111)->GetSubMeshDS()->GetNodes();
N = itn->next();
gp_XY UV111 = myTool->GetNodeUV(TopFace,N);
for (j=0; j<myJSize; ++j) { // loop on all nodes of the base face (ID_Fxy0)
// base node info
const StdMeshers_TNode& aBN = myTNodes[j];
aBNSSID = (SMESH_Block::TShapeID)aBN.ShapeSupportID();
iBNID = aBN.BaseNodeID();
const gp_XYZ& aBNXYZ = aBN.NormCoord();
bool createNode = ( aBNSSID == SMESH_Block::ID_Fxy0 ); // if base node is inside a bottom face
//
// set XYZ on horizontal edges and get node columns of faces:
// 2 columns for each face, between which a base node is located
vector<const SMDS_MeshNode*>* nColumns[8];
double ratio[ NB_WALL_FACES ]; // base node position between columns [0.-1.]
if ( createNode ) {
for ( k = 0; k < NB_WALL_FACES ; ++k ) {
ratio[ k ] = SetHorizEdgeXYZ (aBNXYZ, wallFaceID[ k ],
nColumns[k*2], nColumns[k*2+1]);
}
}
//
// XYZ on the bottom and top faces
const SMDS_MeshNode* n = aBN.Node();
myShapeXYZ[ SMESH_Block::ID_Fxy0 ].SetCoord( n->X(), n->Y(), n->Z() );
myShapeXYZ[ SMESH_Block::ID_Fxy1 ].SetCoord( 0., 0., 0. );
//
// first create or find a top node, then the rest ones in a column
for (i=myISize-1; i>0; --i) // vertical loop, from top to bottom
{
bIsUpperLayer = (i==(myISize-1));
gp_XY UV_Ex01, UV_Ex11, UV_E0y1, UV_E1y1;
if ( createNode ) // a base node is inside a top face
{
// set XYZ on vertical edges and faces
for ( k = 0; k < NB_WALL_FACES ; ++k ) {
// XYZ on a vertical edge
const SMDS_MeshNode* n = (*verticEdgeNodes[ k ]) [ i ];
myShapeXYZ[ verticEdgeID[ k ] ].SetCoord( n->X(), n->Y(), n->Z() );
// XYZ on a face (part 1 from one column)
n = (*nColumns[k*2]) [ i ];
gp_XYZ xyz( n->X(), n->Y(), n->Z() );
myShapeXYZ[ wallFaceID[ k ]] = ( 1. - ratio[ k ]) * xyz;
gp_XY tmp1;
if( bIsUpperLayer ) {
tmp1 = myTool->GetNodeUV(TopFace,n);
tmp1 = ( 1. - ratio[ k ]) * tmp1;
}
// XYZ on a face (part 2 from other column)
n = (*nColumns[k*2+1]) [ i ];
xyz.SetCoord( n->X(), n->Y(), n->Z() );
myShapeXYZ[ wallFaceID[ k ]] += ratio[ k ] * xyz;
if( bIsUpperLayer ) {
gp_XY tmp2 = myTool->GetNodeUV(TopFace,n);
tmp1 += ratio[ k ] * tmp2;
if( k==0 )
UV_Ex01 = tmp1;
else if( k==1 )
UV_Ex11 = tmp1;
else if( k==2 )
UV_E0y1 = tmp1;
else
UV_E1y1 = tmp1;
}
}
}
// fill current node info
// -index in aTNodes
ij=i*myJSize+j;
// -normalized coordinates
aX=aBNXYZ.X();
aY=aBNXYZ.Y();
//aZ=aZL[i];
aZ=(double)i/(double)(myISize-1);
aCoords.SetCoord(aX, aY, aZ);
//
// suporting shape ID
ShapeSupportID(bIsUpperLayer, aBNSSID, aSSID);
if (!myErrorStatus->IsOK()) {
MESSAGE("StdMeshers_Penta_3D::MakeNodes() ");
return;
}
//
aTN.SetShapeSupportID(aSSID);
aTN.SetNormCoord(aCoords);
aTN.SetBaseNodeID(iBNID);
//
if (aSSID!=SMESH_Block::ID_NONE){
// try to find the node
const TopoDS_Shape& aS=myBlock.Shape((int)aSSID);
FindNodeOnShape(aS, aCoords, i, aTN);
}
else{
// create node and get its id
CreateNode (bIsUpperLayer, aCoords, aTN);
//
if ( bIsUpperLayer ) {
const SMDS_MeshNode* n = aTN.Node();
myShapeXYZ[ SMESH_Block::ID_Fxy1 ].SetCoord( n->X(), n->Y(), n->Z() );
// set node on top face:
// find UV parameter for this node
// UV_Ex11
// UV011+-----+----------+UV111
// | |
// | |
// UV_E0y1+ +node +UV_E1y1
// | |
// | |
// | |
// UV001+-----+----------+UV101
// UV_Ex01
gp_Pnt2d aP;
double u = aCoords.X(), v = aCoords.Y();
double u1 = ( 1. - u ), v1 = ( 1. - v );
aP.ChangeCoord() = UV_Ex01 * v1;
aP.ChangeCoord() += UV_Ex11 * v;
aP.ChangeCoord() += UV_E0y1 * u1;
aP.ChangeCoord() += UV_E1y1 * u;
aP.ChangeCoord() -= UV001 * u1 * v1;
aP.ChangeCoord() -= UV101 * u * v1;
aP.ChangeCoord() -= UV011 * u1 * v;
aP.ChangeCoord() -= UV111 * u * v;
meshDS->SetNodeOnFace((SMDS_MeshNode*)n, topfaceID, aP.X(), aP.Y());
}
}
if (!myErrorStatus->IsOK()) {
MESSAGE("StdMeshers_Penta_3D::MakeNodes() ");
return;
}
//
myTNodes[ij]=aTN;
}
}
}
| void StdMeshers_Penta_3D::MakeVolumeMesh | ( | ) | [protected] |
Definition at line 635 of file StdMeshers_Penta_3D.cxx.
References SMESH_MesherHelper.AddVolume(), SMESHDS_SubMesh.GetElements(), SMDS_MeshElement.GetID(), GetIndexOnLayer(), GetMesh(), SMDS_MeshElement.GetNode(), SMESH_test.i1, SMESH_test.i2, SMESH_Block.ID_Fxy0, SMESH_Block.ID_NONE, SMDS_VolumeTool.IsForward(), MESSAGE, myBlock, myCreateQuadratic, myErrorStatus, myISize, myJSize, myShape, myTNodes, myTool, SMDS_MeshElement.NbNodes(), StdMeshers_TNode.Node(), SMDS_VolumeTool.Set(), SMESHDS_Mesh.SetMeshElementOnShape(), SMESHDS_Mesh.SetNodeInVolume(), StdMeshers_SMESHBlock.Shape(), StdMeshers_TNode.ShapeSupportID(), and SMESHDS_Mesh.ShapeToIndex().
Referenced by Compute().
{
int i, j, ij, ik, i1, i2, aSSID;
//
SMESH_Mesh* pMesh = GetMesh();
SMESHDS_Mesh* meshDS = pMesh->GetMeshDS();
//
int shapeID = meshDS->ShapeToIndex( myShape );
//
// 1. Set Node In Volume
ik = myISize-1;
for (i=1; i<ik; ++i){
for (j=0; j<myJSize; ++j){
ij=i*myJSize+j;
const StdMeshers_TNode& aTN = myTNodes[ij];
aSSID=aTN.ShapeSupportID();
if (aSSID==SMESH_Block::ID_NONE) {
SMDS_MeshNode* aNode = (SMDS_MeshNode*)aTN.Node();
meshDS->SetNodeInVolume(aNode, shapeID);
}
}
}
//
// 2. Make pentahedrons
int aID0, k , aJ[3];
vector<const SMDS_MeshNode*> aN;
//
SMDS_ElemIteratorPtr itf, aItNodes;
//
const TopoDS_Face& aFxy0=
TopoDS::Face(myBlock.Shape(SMESH_Block::ID_Fxy0));
SMESH_subMesh *aSubMesh0 = pMesh->GetSubMeshContaining(aFxy0);
SMESHDS_SubMesh *aSM0 = aSubMesh0->GetSubMeshDS();
//
itf = aSM0->GetElements();
while(itf->more()) {
const SMDS_MeshElement* pE0 = itf->next();
//
int nbFaceNodes = pE0->NbNodes();
if(myCreateQuadratic)
nbFaceNodes = nbFaceNodes/2;
if ( aN.size() < nbFaceNodes * 2 )
aN.resize( nbFaceNodes * 2 );
//
for ( k=0; k<nbFaceNodes; ++k ) {
const SMDS_MeshNode* pNode = pE0->GetNode(k);
// if(myTool->IsMedium(pNode))
// continue;
aID0 = pNode->GetID();
aJ[k] = GetIndexOnLayer(aID0);
if (!myErrorStatus->IsOK()) {
MESSAGE("StdMeshers_Penta_3D::MakeVolumeMesh");
return;
}
}
//
bool forward = true;
for (i=0; i<ik; ++i) {
i1=i;
i2=i+1;
for(j=0; j<nbFaceNodes; ++j) {
ij = i1*myJSize+aJ[j];
const StdMeshers_TNode& aTN1 = myTNodes[ij];
const SMDS_MeshNode* aN1 = aTN1.Node();
aN[j]=aN1;
//
ij=i2*myJSize+aJ[j];
const StdMeshers_TNode& aTN2 = myTNodes[ij];
const SMDS_MeshNode* aN2 = aTN2.Node();
aN[j+nbFaceNodes] = aN2;
}
// check if volume orientation will be ok
if ( i == 0 ) {
SMDS_VolumeTool vTool;
switch ( nbFaceNodes ) {
case 3: {
SMDS_VolumeOfNodes tmpVol (aN[0], aN[1], aN[2],
aN[3], aN[4], aN[5]);
vTool.Set( &tmpVol );
break;
}
case 4: {
SMDS_VolumeOfNodes tmpVol(aN[0], aN[1], aN[2], aN[3],
aN[4], aN[5], aN[6], aN[7]);
vTool.Set( &tmpVol );
break;
}
default:
continue;
}
forward = vTool.IsForward();
}
// add volume
SMDS_MeshVolume* aV = 0;
switch ( nbFaceNodes ) {
case 3:
if ( forward ) {
//aV = meshDS->AddVolume(aN[0], aN[1], aN[2],
// aN[3], aN[4], aN[5]);
aV = myTool->AddVolume(aN[0], aN[1], aN[2], aN[3], aN[4], aN[5]);
}
else {
//aV = meshDS->AddVolume(aN[0], aN[2], aN[1],
// aN[3], aN[5], aN[4]);
aV = myTool->AddVolume(aN[0], aN[2], aN[1], aN[3], aN[5], aN[4]);
}
break;
case 4:
if ( forward ) {
//aV = meshDS->AddVolume(aN[0], aN[1], aN[2], aN[3],
// aN[4], aN[5], aN[6], aN[7]);
aV = myTool->AddVolume(aN[0], aN[1], aN[2], aN[3],
aN[4], aN[5], aN[6], aN[7]);
}
else {
//aV = meshDS->AddVolume(aN[0], aN[3], aN[2], aN[1],
// aN[4], aN[7], aN[6], aN[5]);
aV = myTool->AddVolume(aN[0], aN[3], aN[2], aN[1],
aN[4], aN[7], aN[6], aN[5]);
}
break;
default:
continue;
}
meshDS->SetMeshElementOnShape(aV, shapeID);
}
}
}
| double StdMeshers_Penta_3D::SetHorizEdgeXYZ | ( | const gp_XYZ & | aBNXYZ, |
| const int | aFaceID, | ||
| std::vector< const SMDS_MeshNode * > *& | aCol1, | ||
| std::vector< const SMDS_MeshNode * > *& | aCol2 | ||
| ) | [protected] |
Definition at line 566 of file StdMeshers_Penta_3D.cxx.
References StdMeshers_SMESHBlock.Block(), SMESH_Block.EdgePoint(), SMESH_Block.GetCoordIndOnEdge(), SMESH_Block.GetFaceEdgesIDs(), StdMeshers_SMESHBlock.IsForwadEdge(), myBlock, myShapeXYZ, myWallNodesMaps, SMESH_AdvancedEditor.n1, SMESH_AdvancedEditor.n2, SMESH_Block.ShapeIndex(), SMDS_MeshNode.X(), SMESH_AdvancedEditor.xyz1, SMESH_AdvancedEditor.xyz2, SMDS_MeshNode.Y(), and SMDS_MeshNode.Z().
Referenced by MakeNodes().
{
// find base and top edges of the face
enum { BASE = 0, TOP };
vector< int > edgeVec; // 0-base, 1-top
SMESH_Block::GetFaceEdgesIDs( aFaceID, edgeVec );
//
int coord = SMESH_Block::GetCoordIndOnEdge( edgeVec[ BASE ] );
bool isForward = myBlock.IsForwadEdge( edgeVec[ BASE ] );
double param = aBaseNodeParams.Coord( coord );
if ( !isForward)
param = 1. - param;
//
// look for columns around param
StdMeshers_IJNodeMap & ijNodes =
myWallNodesMaps[ SMESH_Block::ShapeIndex( aFaceID )];
StdMeshers_IJNodeMap::iterator par_nVec_1 = ijNodes.begin();
while ( par_nVec_1->first < param )
par_nVec_1++;
StdMeshers_IJNodeMap::iterator par_nVec_2 = par_nVec_1;
//
double r = 0;
if ( par_nVec_1 != ijNodes.begin() ) {
par_nVec_1--;
r = ( param - par_nVec_1->first ) / ( par_nVec_2->first - par_nVec_1->first );
}
aCol1 = & par_nVec_1->second;
aCol2 = & par_nVec_2->second;
// top edge
if (1) {
// this variant is better for cases with curved edges and
// different nodes distribution on top and base edges
const SMDS_MeshNode* n1 = aCol1->back();
const SMDS_MeshNode* n2 = aCol2->back();
gp_XYZ xyz1( n1->X(), n1->Y(), n1->Z() );
gp_XYZ xyz2( n2->X(), n2->Y(), n2->Z() );
myShapeXYZ[ edgeVec[ 1 ] ] = ( 1. - r ) * xyz1 + r * xyz2;
}
else {
// this variant is better for other cases
// SMESH_MesherHelper helper( *GetMesh() );
// const TopoDS_Edge & edge = TopoDS::Edge( myBlock.Shape( edgeVec[ TOP ]));
// double u1 = helper.GetNodeU( edge, n1 );
// double u2 = helper.GetNodeU( edge, n2 );
// double u = ( 1. - r ) * u1 + r * u2;
// gp_XYZ topNodeParams;
// myBlock.Block().EdgeParameters( edgeVec[ TOP ], u, topNodeParams );
// myBlock.Block().EdgePoint( edgeVec[ TOP ],
// topNodeParams,
// myShapeXYZ[ edgeVec[ TOP ]]);
}
// base edge
myBlock.Block().EdgePoint( edgeVec[ BASE ],
aBaseNodeParams,
myShapeXYZ[ edgeVec[ BASE ]]);
return r;
}
| void StdMeshers_Penta_3D.SetMesh | ( | SMESH_Mesh & | theMesh | ) | [protected] |
Definition at line 249 of file StdMeshers_Penta_3D.hxx.
Referenced by Compute().
{
myMesh=(void *)&theMesh;
}
| void StdMeshers_Penta_3D.SetTolerance | ( | const double | theTol3D | ) |
Definition at line 190 of file StdMeshers_Penta_3D.hxx.
{
myTol3D=theTol3D;
}
| void StdMeshers_Penta_3D::ShapeSupportID | ( | const bool | theIsUpperLayer, |
| const SMESH_Block::TShapeID | theBNSSID, | ||
| SMESH_Block::TShapeID & | theSSID | ||
| ) | [protected] |
Definition at line 967 of file StdMeshers_Penta_3D.cxx.
References SMESH_Block.ID_E00z, SMESH_Block.ID_E01z, SMESH_Block.ID_E0y0, SMESH_Block.ID_E0y1, SMESH_Block.ID_E10z, SMESH_Block.ID_E11z, SMESH_Block.ID_E1y0, SMESH_Block.ID_E1y1, SMESH_Block.ID_Ex00, SMESH_Block.ID_Ex01, SMESH_Block.ID_Ex10, SMESH_Block.ID_Ex11, SMESH_Block.ID_F0yz, SMESH_Block.ID_F1yz, SMESH_Block.ID_Fx0z, SMESH_Block.ID_Fx1z, SMESH_Block.ID_Fxy0, SMESH_Block.ID_NONE, SMESH_Block.ID_V000, SMESH_Block.ID_V001, SMESH_Block.ID_V010, SMESH_Block.ID_V011, SMESH_Block.ID_V100, SMESH_Block.ID_V101, SMESH_Block.ID_V110, SMESH_Block.ID_V111, and myErrorStatus.
Referenced by MakeNodes().
{
switch (aBNSSID) {
case SMESH_Block::ID_V000:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_V001 : SMESH_Block::ID_E00z;
break;
case SMESH_Block::ID_V100:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_V101 : SMESH_Block::ID_E10z;
break;
case SMESH_Block::ID_V110:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_V111 : SMESH_Block::ID_E11z;
break;
case SMESH_Block::ID_V010:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_V011 : SMESH_Block::ID_E01z;
break;
case SMESH_Block::ID_Ex00:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_Ex01 : SMESH_Block::ID_Fx0z;
break;
case SMESH_Block::ID_Ex10:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_Ex11 : SMESH_Block::ID_Fx1z;
break;
case SMESH_Block::ID_E0y0:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_E0y1 : SMESH_Block::ID_F0yz;
break;
case SMESH_Block::ID_E1y0:
aSSID=(bIsUpperLayer) ? SMESH_Block::ID_E1y1 : SMESH_Block::ID_F1yz;
break;
case SMESH_Block::ID_Fxy0:
aSSID=SMESH_Block::ID_NONE;//(bIsUpperLayer) ? Shape_ID_Fxy1 : Shape_ID_NONE;
break;
default:
aSSID=SMESH_Block::ID_NONE;
myErrorStatus->myName=10; // Can not find supporting shape ID
myErrorStatus->myComment = "Internal error of StdMeshers_Penta_3D";
break;
}
return;
}
| double StdMeshers_Penta_3D.Tolerance | ( | ) | const |
Definition at line 194 of file StdMeshers_Penta_3D.hxx.
{
return myTol3D;
}
StdMeshers_SMESHBlock StdMeshers_Penta_3D.myBlock [protected] |
Definition at line 259 of file StdMeshers_Penta_3D.hxx.
Referenced by ClearMeshOnFxy1(), FindNodeOnShape(), MakeBlock(), MakeMeshOnFxy1(), MakeNodes(), MakeVolumeMesh(), and SetHorizEdgeXYZ().
std::map< int, int > StdMeshers_Penta_3D.myConnectingMap [protected] |
Definition at line 267 of file StdMeshers_Penta_3D.hxx.
Referenced by GetIndexOnLayer(), and MakeConnectingMap().
bool StdMeshers_Penta_3D.myCreateQuadratic [protected] |
Definition at line 272 of file StdMeshers_Penta_3D.hxx.
Referenced by Compute(), LoadIJNodes(), MakeMeshOnFxy1(), MakeNodes(), and MakeVolumeMesh().
Definition at line 261 of file StdMeshers_Penta_3D.hxx.
Referenced by CheckData(), Compute(), Evaluate(), GetIndexOnLayer(), MakeBlock(), MakeMeshOnFxy1(), MakeNodes(), MakeVolumeMesh(), and ShapeSupportID().
int StdMeshers_Penta_3D.myISize [protected] |
Definition at line 264 of file StdMeshers_Penta_3D.hxx.
Referenced by MakeMeshOnFxy1(), MakeNodes(), and MakeVolumeMesh().
int StdMeshers_Penta_3D.myJSize [protected] |
Definition at line 265 of file StdMeshers_Penta_3D.hxx.
Referenced by MakeConnectingMap(), MakeMeshOnFxy1(), MakeNodes(), and MakeVolumeMesh().
void* StdMeshers_Penta_3D.myMesh [protected] |
Definition at line 260 of file StdMeshers_Penta_3D.hxx.
TopoDS_Shape StdMeshers_Penta_3D.myShape [protected] |
Definition at line 258 of file StdMeshers_Penta_3D.hxx.
Referenced by CheckData(), Compute(), MakeBlock(), MakeMeshOnFxy1(), and MakeVolumeMesh().
std::vector<gp_XYZ> StdMeshers_Penta_3D.myShapeXYZ [protected] |
Definition at line 270 of file StdMeshers_Penta_3D.hxx.
Referenced by MakeNodes(), SetHorizEdgeXYZ(), and StdMeshers_Penta_3D().
std::vector<StdMeshers_TNode> StdMeshers_Penta_3D.myTNodes [protected] |
Definition at line 263 of file StdMeshers_Penta_3D.hxx.
Referenced by MakeConnectingMap(), MakeMeshOnFxy1(), MakeNodes(), and MakeVolumeMesh().
double StdMeshers_Penta_3D.myTol3D [protected] |
Definition at line 266 of file StdMeshers_Penta_3D.hxx.
Referenced by FindNodeOnShape(), and StdMeshers_Penta_3D().
SMESH_MesherHelper* StdMeshers_Penta_3D.myTool [protected] |
Definition at line 273 of file StdMeshers_Penta_3D.hxx.
Referenced by Compute(), FindNodeOnShape(), LoadIJNodes(), MakeMeshOnFxy1(), MakeNodes(), MakeVolumeMesh(), and StdMeshers_Penta_3D().
std::vector<StdMeshers_IJNodeMap> StdMeshers_Penta_3D.myWallNodesMaps [protected] |
Definition at line 269 of file StdMeshers_Penta_3D.hxx.
Referenced by FindNodeOnShape(), MakeNodes(), SetHorizEdgeXYZ(), and StdMeshers_Penta_3D().